http://www.table-saw-guide.com/table-saw-blog.html Stay up to date on new pages, important woodworking news and more at Table Saw Guide. Subscribe here... en-us table saw Thu, 17 Nov 2011 05:36:42 GMT Thu, 17 Nov 2011 05:36:42 GMT table-saw-guide.com http://www.table-saw-guide.com/table-saw-blog.html#Table-Saws-in-the-News According to this article from CBC News (Canada), over 10 people a day lose a finger or worse in the U.S. alone, let alone the rest of the world. Find out what is/isn't being done by table saw manufacturers and the U.S. government to try and lower these numbers. Thu, 17 Nov 2011 05:36:42 GMT http://www.table-saw-guide.com/craftex-ct086.html The Craftex CT086 wood jointer is a reliable machine that fits nicely in a small to medium sized home workshop. I've had mine for a couple of years now... Tue, 08 Nov 2011 03:19:26 GMT http://www.table-saw-guide.com/mitered-rabbet.html A mitered rabbet joint is a good choice when you want the good looks of a mitered corner, but with the added strength and self-aligning properties... Mon, 31 Oct 2011 06:51:10 GMT http://www.table-saw-guide.com/drawer-fronts.html With a table saw and a router, you can make professional looking drawer fronts yourself. These ones are for a kitchen cabinet refacing job I'm doing in a small townhouse... Mon, 17 Oct 2011 01:51:45 GMT http://www.table-saw-guide.com/woodworking-hand-tools.html Some of these woodworking hand tools were originally designed for metalworking, yet are just at home in the wood shop. ... Tue, 11 Oct 2011 00:55:35 GMT http://www.table-saw-guide.com/vix-bits.html Vix bits produce perfectly centered pilot holes when installing cabinet hardware. Often refered to as a hinge bit... Tue, 11 Oct 2011 00:44:43 GMT http://www.table-saw-guide.com/resawing.html Resawing is simply cutting a thicker board into two or more thinner boards. A table saw does a pretty nice job of ripping wood into thinner boards... Wed, 02 Mar 2011 12:06:47 GMT http://www.table-saw-guide.com/table-saw-blog.html#SawStop-Competitor-Waiting-For-Patent-Approval David Butler, head of Whirlwind Tool Co. is waiting on patent approval for a new flesh sensing technology that might give SawStop a run for their money. The design incorporates a blade brake that is activated when fingers get too close to the blade. The blade comes to a stop in one-eighth of a second, before an injury can result and with no harm to the blade or saw. But wait, it gets better! Although he's built prototypes for a few models of portable and full size saws, Dave says the system can be readily retrofitted to the millions of saws already in use. Sun, 27 Feb 2011 10:23:15 GMT